We measure where others are just guessing.

Precision at the highest level.

Truck brake tester BD 8427

Up to 18 t axle load, mechanic NEW 2017, PC ready | ICperform Software, New Tablet-App | 2 Speed, electromagnetic motor brake, 4 x 4, Roller 1000 mm | ASA-Livestream, hydraulic load simulation, 8-points-weight system

Article number: BD 8427

  • Up to 18 t axle load, mechanic NEW 2017, PC ready
  • ICperform Software, New with Tablet-App
  • 2 Speed, 4 x 4
  • Coated Rollers, 1000 mm
  • With electromagnetic motor brake
  • ASA-Livestream
  • Hydraulic load simulation
  • 8-points-weight system
  • Fits in popular foundations

Optional accessories

  • Durable sliding
  • 8-points-weight system (available in bill of material in some configuration)
  • Option for Tacho control
  • Drive-over plates
  • Weather-resistant hot-dip galvanization, steel chains
  • Radio controlled air-pressure sensors
  • Pit safety in different sizes

ICperform: new Software

  • Intuitive and fast in use
  • Optimum display of all relevant measured values
  • Easy handling
  • Faster brake testing
  • Print and database functions
  • Connection with other test devices within the test lane

Icperform Tablet-App

ICperform tablet app: measuring faster without having to get on and off the truck

  • The intuitive user interface can be accessed via Android tablets operate and enable stable measured value transmission and control via the W-LAN connection - even from inside the vehicle.
  • Roll resistance, ovality, braking forces per axis or wheel, left-right comparison or pressure values, all data are displayed in real time and visually intuitive
  • Working with Beissbarth‘s ICperform tablet app speeds up the process and eliminates unnecessary entry and exit from the vehicle.

New! ICperform tablet app from Google Play

  • The app is available at play.google.com. Download it to your tablet and try the features for up to 30 days free of charge. You can obtain your license for the ICperform tablet app (order number 1 691 810 756) directly from the Beissbarth hotline.

Carrying out brake tests easily and quickly with the software ICperform tablet

  • Data entry of vehicle information
  • Selection of testing mode
  • Test control conveniently in the vehicle cabin
  • Usage of own tablet devices
  • Same representation as on the workshop PC monitor

Easy control from the inside of the truck

  • Intuitive and guided: fully automated procedure (covers 80 % of the common test ingroutines) incl. archiving and printing of the measured values
  • Integrated remote control
  • State of the braking test and important measuring results always at a glance

Download at play.google.com and use the app for free of charge for a 30 days testing period

Connected Repair for networked truck systems

  • Brake testing
  • Headlight testing
  • Emission analysis
  • Air condition service

Connected Repair is able to read commercially available job data. Thanks to crosslinking, the central server-based software solution eases and accelerates the work processes of all connected test devices. Purchasing BD, the software for one work station is included within the scope of delivery.

  • Installation of one PC is free of charge
  • Networking of other workplaces via licence (availability at their Beissbarth dealers.)
  • Available in 16 languages

Connected repair: for faster work processes with the HTD 815 headlight tester

  • Tests all types of light sources (xenon, bi-xenon, LED, bi-LED, halogen) and all types of truck headlights.
  • MLD 815 Matrix/DLA version for glare-free high-beam systems (DLA*, Matrix)
  • With CMOS camera and integrated printer.

 

* Dynamic Light Assist

Hydraulic load simulation

  • In line with § 29 StVZO (VkBl. 09/2011), of the German road traffic registration ordinance, Deadline 31.12.2019*
  • Lifting device for load simulation (lifting height: 200 mm)
  • Neatly integrated into the roller housing
  • Increases the brake-cyclinder pressure to the 1.7 bar demanded
  • Remote control (optional) right from the driver cab
  • Suitable for almost all trucks and trailers
  • Especially recommended for empty/lightweight lorries

According to the guideline, commercial vehicles need to be tested with a minimum statutory brake pressure of 1.7 bar. In case of commercial vehicles with a high load/no-load ratio - e.g. empty trucks and trailers - not building up the required minimum pressure, load simulation can be used as well. Instead of sophisticated tying down of multiple axles, the axle to be tested can also be lifted for the test. At this much simpler procedure, the required axial pressure is created by altering the weight balance.

Fits in almost all popular foundations

  • Easy installation
  • Because the hydraulics of the load simulation is integrated in the roller set housing, it is possible install the BD in almost all old foundations. Simply remove the old test bench and use new ones.

System requirements

Min. PC requirements

  • Operating system: Windows 7, Windows 10, 64 Bit
  • Processor: Celeron 2.7 GHz
  • Random access memory: 4 GB
  • Hard disk: 500 GB
  • Serial port: 2x RS232 (COM)

Min. PC display requirements (trolley)

  • Size: 27"
  • Solution: 1920 x 1080
  • Width-to-height ratio: 16:9

Min. HDMI-TV requirements (substitute for analogue display)

  • Minimum size: 40"
  • Recommended size: 55"
  • Solution: 1920 x 1080
  • Width-to-height ratio: 16:9

Min. tablet requirements

  • Operating system: Android 5.0 or higher
  • Minimum size: 8"
  • Recommended size: 9,6"
  • Width-to-height ratio: 16 : 9 or 16:10
  • Basic requirement: WLAN network with router

Scope of delivery

  • Truck Software (part No. 1 691 810 741)
  • Incl. ASA-Livestream
  • Hydraulic load simulation
  • Roller set left (part No. 1 691 810 512)
  • Roller set right (part No. 1 691 810 513)
  • Power-Box (part No. 1 691 810 547)
  • Incl. 30 m cable
Standard-Software Truck | ICperform1 691 810 741
Roller set series 8 | left1 691 810 512
Roller set series 8 | right1 691 810 513
Power-Box Series 81 691 810 547
Max. wheel diameter1200 mm
Max. rim diameter40 "
Protection classIP 54
Length1350 mm
Height782 mm
Measuring system- DMS
Width1140 mm
Coefficient of friction dry/wet0,8 / 0,7
Roller length1000 mm
Roller elevation50 mm
Min. rim diameter13 "
Roller diameter280 mm
Min. test width900 mm
Max. test width2900 mm
Min. wheel diameter320 mm
Roller axle distance438 mm
Weight without lifting device approx.750 kg
Weight with lifting device approx.1030 kg
Roller set lifting200 mm
Motor connection cable7 x 4 mm²
Gear ratio1 / 17,27
Test speed (low)2,3 km/h
Test speed (high)4,6 km/h
Motor revolution speed (low)1450 rpm
Motor revolution speed (high)2950 rpm
Roller revolution speed (low)43,4 rpm
Roller revolution speed (high)87,6 rpm
Motor power (low)2 x 10 kW
Motor power (high)2 x 12,5 kW
Built-in frame BD 8xxx / 1000 mm / 18 to | separated, with pit1 691 810 713
Built-in frame BD 8xxx / 1000/1100 mm | track width 3000 mm | non-separated (w/o pit)1 691 810 714
Built-in frame BD 8xxx / 1000/1100 mm | track width 3100 mm | non-separated (w/o pit)1 691 810 715
Built-in frame BD 8xxx / 1000/1100 mm | track width 3200 mm | non-separated (w/o pit)1 691 810 716
Tablet-App 1 691 810 756
IR remote control Truck1 691 810 704
IR Kit Truck1 691 810 702
Remote Control for load simulation1 691 810 701
Testlane PC with a serial interface1 691 810 703
PC cabinet Standard | empty1 691 811 250
PC gear pack for PC cabinet Standard1 691 810 743
Monitor holder 17 - 27"1 693 740 884
Monitor holder 22 - 35"1 693 740 911
Display RAL 7016 | analog, rectangular | LCD, svivel arm, IR receiver1 691 810 750
Stand column aluminium | RAL 7016 | for TV Monitor / rectangular analog display1 691 810 722
Pit safety PSC2 | cross1 691 810 723
Pit safety PSC2 | cross1 691 810 724
Pit safety PSC2 | cross1 691 810 725
Pit safety PSC1 | long1 691 810 726
Swivel bracket PSC11 692 100 102
Wired air pressure sensor APS1 | basic set - PM / PX11 691 810 733
Wired pedal force tester APS1 | PD1 691 810 734
Warn-System for air pressure sensors1 691 810 735
Side Slip Tester MSS 84001 691 841 007
Built in frame for MSS 84001 691 842 001
Joint play detector GST 8508 | 400V1 691 850 100
Kit-Drive over plate BD 6xxx / BD 8xxx / 1000/1100 mm1 691 810 717
Adaptation kit for tachograph test with proximity switch BD8xxx | 18 to1 691 810 736
Adaptation kit for Semmler Tachocontrol BD8xxx | 18 to1 691 810 737
Digital calibration kit for brake tester1 691 601 392
Air pressure sensors | Truck | APS 31 693 770 658

Product information sheet