We measure where others are just guessing.

Precision at the highest level.

Suspension tester SN 680 | 400 V | EUSAMA | with noise detection

Special accessory for series BD 4xxx brake tester | only to be used for checking the technical condition of suspension elements

Article number: 1 691 620 309

  • Under unfavorable conditions, the road surface adhesion of a wheel is governed by the technical condition of the suspension elements (suspension system, wheel bearings, tires and shock absorbers).
  • The SN 680 measures the relative road surface adhesion of a wheel on the basis of the internationally recognized EUSAMA principle.
  • The results of the full chassis test provide an overall assessment of the road safety of the vehicle.
  • Measurement system: Bending bar with strain gauge

Scope of delivery:

  • Suspension tester SN 680
  • RR Connecting cable
  • RR Set of clamping fixtures and fastening materials
Weight327 kg
Packing2420 x 820 x 700 kg
Fuse protection3 x 20 A
Protection classIP 54
Length440 mm
Height280 mm
Operating temperature-10 – 50 °C
Power supply400 V | 50 - 60 Hz
Measuring systemDMS
Max. sound pressure level70 dB(A)
Width2360 mm
Max. axle load testable1650 kg
Test width min. - max.820 - 2200 mm
Test frequency0 - 30 Hz
Motor power2 x 3 kW
Engine speed1420 rpm
Temperature max.90 °C
Storage temperature-10 - 50 °C
Supply lead5 x 2,5 mm²
Fuse rating of power supply8,2 A
Test principle- Excitation method (principle of EUSAMA)
Test plate length690 mm
Test plate width273 mm
Power factor (cos φ)0,7
Measuring range, max. stroke6 mm
Gross weight357 kg
Phases3
Relative humidity max.85 %
Max. drive-over load4000 kg
Frequency range noise detection10 - 30 Hz
Edge protection for suspension Tester SA 640 / SN 6801 691 622 002
Drive over ramp to replace suspension tester SA / SN 6xx1 691 621 026
Edge protector for test lane TL / SL 6xx1 691 602 001
Installation frame for test lane with EUSAMA suspension tester1 691 602 002
Spacer for BD 4xxx in combination with SA 640 / SN 680935 603 042
Installation kit for suspension tester SA 6401 691 621 001
Clamp set for EUSAMA suspension tester1 691 621 000
Cable set 400 V | Power-Box to suspension tester | 30 m1 691 603 369
Cable set BNet-Cable | Power-Box to suspension tester | 30 m1 691 602 557
Positioning ramps for suspension tester1 691 621 017

By viewing this video, you accept YouTube's privacy policy.
Read more...

Product information sheet