We measure where others are just guessing.
Precision at the highest level.
Safe tyre fitting for commercial vehicles | Rim diameter 14 - 42", with clamp extension until 56" | 6-point jaw clamp | Easy to use - with radio control
Article number: 1 694 201 399
Also available as a version with mobile operating console with joystick (item no. 1 694 200 079).
Version for Australia
|Wheel diameter max.||2300 mm|
|Bead breaker force||3700 kg|
|Rim diameter max.||42 "|
|Wheel width max.||1300 mm|
|Wheel weight max.||1400 kg|
|Power supply||3 x 400 V | 50 - 60 Hz|
|Clamping capacity (with extension)||44 - 56 "|
|Rim diameter min.||14 "|
|Rim clamp for aluminium rims||1 695 300 099|
|Protection jaws for aluminium rims | 56" | for MS 78 and MS 80 | 6 pcs.||1 695 301 575|
|Roller for tubeless tyres | for all truck tyre changers||1 695 300 102|
|Inflation Cage | for truck tyres||1 694 302 032|
|Electronic inflation computer | for tyre inflation cage||1 695 700 052|
|Tubeless Inflation Device | for inflation cage||1 695 700 051|
|Caterpillar Adapter | for MS 78 and MS 80 | 6 pcs.||1 695 301 681|
|Extension claws for thick rim flanges | for MS 78 and MS 80 | 6 pcs.||1 695 301 748|
|Center hole adapter from 80mm | for MS 78 and MS 80 | 6 pcs.||1 695 301 747|
|Clamping jaw extension up to 60" | for MS 78 and MS 80 | 6 pcs.||1 695 301 606|
|Pneumatic Bead Depressor | for truck tyre changers MS 70/75/78/80||1 695 103 526|
|Performance Demounting Tool | for models MS 78 and MS 80 built before 2017||1 695 300 188|
|Split ring wheel clamp | for OTR (Off-the-road) wheels||1 695 300 098|
|Bead lifting lever | for truck tyre changers||1 695 300 094|
Protects user during inflation of industrial tyres with a diameter of up to 1500mm.
The special type of perforated mesh enclosing the structure minimizes the shock wave which might be generated by a tyre burst.
Note: Tubeless inflation kit and the electronic inflation control need to be ordered separately.
On request, the inflation cage can be equipped with an electronic system which allows a standalone inflating process. The main feature is that once the necessary pressure has been set and the process started, the pressure gauge completes the operation unassisted, leaving the operator free to carry out other tasks.
On request and in combination with the electronic inflating system, the inflating cage can be equipped with a blast inflating system. The side opening allows this operation to be carried out easily inside the box, with no reduction of operator safety.