We measure where others are just guessing.

Precision at the highest level.

Q.Lign T.41 Kit

Q.Lign T.41 as kit version for wall mounting and tablet operation for 360° access to the lift. For customized customer solutions. Without wheel clamps and turntables.

Article number: 1 690 800 000

Ultimate productivity - vehicle after vehicle
The T-Series builds on the existing Q.Lign platform and focuses entirely on wheel alignment. With Q.Lign T.41, workshops raise the bar even higher and can thus exploit their full service potential.

Measuring at the highest level

Camera beam measures permanently from a height of 2.8 meters
No motor, no winch, no wear and tear
No up, no down, no injuries or damage
No movement, no matter if short or long wheelbases

Everything perfectly in sight

Four wheels, four cameras
Separate camera for the rear axle for more accurate toe values on the front axle
Install anywhere within 1.8 to 3.3 meters of the front axle
Measure and adjust from 0 to 2 meters platform height at any time

Work smarter, not harder

Measurement starts directly with attachment of the targets to quickly determine accident vehicles
All targets work on any wheel reduces setup times and setup errors
Active MEMS Technology: Constant measurement against gravity for uncompromising accuracy
Caster sweep at floor level without the need for a stool or ladder
Access to clear and easy-to-understand PDF reports from anywhere inside your shop

The world's first web-based wheel aligner

Eliminates need for trolley and PC and creates more space
Incredibly efficient with up to 95% power savings compared to PC-based systems
Stream-to-X: Access software on any TV, PC, laptop, tablet or smartphone
Intuitive software, streamlined operations, more productivity
Easy integration of Q.Lign into your shop's daily processes and systems

Full speed, without compromising on precision

Powerful software with optimized workflow for the entire wheel alignment process
Reduced runout process for more productivity
3D camera technology produces highly accurate realtime measurements

Space requirement

Minimum height of 2800mm
Minimum clearance of 2800mm on four-post lifts

Scope of delivery

Camera beam with 4 cameras
Q.Lign display module
4x targets with AutoID
Tablet
Brake lock and steering wheel lock
Powerbox for power supply

Note: For the kit version, turnplates and wheel clamps must be ordered separately, depending on customer requirements.

Weight	60 kg
Packaging unit	1 Piece(s)
Power supply	90-264V \| 1Ph \| 47-63Hz
Individual toe front/rear axle	Ja
Total toe	Ja
Toe-out on turns	Ja
Camber front/rear axle	Ja
Caster	Ja
SAI	Ja
Set-back	Ja
Thrust angle	Ja
Sensor count	4 Piece(s)
Data transmission type	kabellos
Measuring system	3D mit Messbalken (fixiert)
Display size	10 "
Power consumption	45 W
Wheel base	1750 - 4600 mm
Space requirement width	2595 mm
Run-out compensation	Ja
Individual toe front axle	Ja
Individual toe rear axle	Ja
Camber front	Ja
Camber rear	Ja
Set-back front axle	Ja
Set-back rear axle	Ja
Geometric centre line	Ja
Included angle	Ja
Ride height modified vehicle specs	Yes
Vehicle dimensions live	Ja
Set-up height	2800 mm
Packaging length	2960 mm
Packaging width	860 mm
Packaging height	480 mm
Gross weight	60 kg
Country of Origin, customs	DE
Number of languages (software)	30
Distance camera - center of turntable	1800 - 3300 mm
Clearance front posts of lift min.	2800 mm

Vehicle database update Q.Lign \| Key Card 365	1 690 002 019
Wall mount \| Q.Lign T-Series \| 550-870mm	1 690 801 053
Magnetic clamps for wheel bolts \| 100mm	1 690 701 521
Magnetic clamps for wheel bolts \| 75mm	1 690 701 508
Self-centering quick clamp for Tesla	1 690 380 161
Self-centering quick clamp for Porsche	1 690 380 010
Self-centering quick clamp for Porsche	1 690 301 003
Central clamp Porsche Carrera GT	1 690 301 002
Central clamp Porsche 911 GT3 and Turbo	1 690 380 002
Self-centering quick clamp for Ferrari	1 690 381 299
Self-centering quick clamp \| for Lamborghini	8 900 380 016
Multi-Fit wheel clamp with standard claws \| 13 - 22" \| 4 pcs.	1 690 311 112
Adapter set Q.Grip \| for Q.Lign \| 4 pcs.	1 690 101 010
ProClamp wheel clamp \| 13 - 23" \| 1 pc	1 690 100 001
Quick clamp Mercedes Benz \| OEM	1 690 801 002
Quick clamp BMW \| OEM	1 690 801 001
Extension set for Multi-fit clamps \| 23 - 28"	1 690 311 113
Mechanical aluminum turntable Standard	1 690 501 001
Mechanical aluminum turntable Precision	1 690 401 028
Electronic aluminum turntable without connecting cable \| Standard	1 690 401 011
Electronic aluminum turntable without connecting cable \| Precision	1 690 401 013
Filling piece for aluminum turntable	1 690 702 082
Filling piece for aluminum precision turntable	1 690 102 041
Storage kit \| for 4x Q.Grip	1 690 801 048
Storage kit \| for 4x MultiFit	1 690 801 047