We measure where others are just guessing.
Precision at the highest level.
Automatic tyre tread measurement system with crossing speed up to 8 km/h | Configure you own device for inground or onground installations
Article number: 1 691 200 002
NEW: Easy Tread 2.0 comes standard with a connectivity kit to digitize and automate your service lane:
The high weight and torque of electric vehicles causes enormous wear on tires and chassis components. The automatic tire diagnosis of every vehicle entering a workshop allows keeping the tire business inhouse and increasing customer loyalty by. The immediate evaluation of the tire wear pattern simultaneously generates service opportunities for wheel alignment and potentially ADAS calibration.
The tyres are the only contact points between a vehicle and the road. The quality of this bonds decides how safely the vehicle can be accelerated and braked. Especially aquaplaning can only be avoided by sufficient tread depth. This is why checking tread wear is a mandatory item of all statutory safety inspection. At the same time, uneven tread wear is a clear indication for a workshop that a wheel alignment should be considered - and that a wheel alignment check should be proposed to the customer.
The ANPR camera to capture the license plates for every crossing needs to be ordered separately.
For inground installation an installation frame is required as well as a center cover, depending on whether an ANPR camera is used or not.
Onground installations require drive-over ramps.
|Tyre width max.||450 mm|
|Protection class||IP 65|
|Power supply||100 - 230 V | 50 - 60 Hz | 1 ph|
|Maximum load per axle||4 t|
|Operating temperature||0 - 40 °C|
|Track width||1080 - 1820 mm|
|Speed max.||8 km/h|
|Number of languages (software)||18|
|Foundation frame for Easy Tread and VAS 741083 RDS||1 691 200 010|
|Drive-over ramps kit | for onground installations||1 691 200 042|
|License plate recognition Easy Cam | Inground||1 691 200 009|
|Centre cover Easy Tread and VAS 741083 RDS||1 691 202 069|
|License plate recognition Easy Cam | Above ground||1 691 200 008|
|Cable tunnel | for onground installations of Easy Tread||1 691 201 023|
|Cable protection | for onground installations without Easy Cam||1 691 202 039|
|PC trolley for Easy Tread||1 691 200 023|
Three cable tunnels needed for onground installations without Easy Cam, only two required for installations with Easy Cam.