We measure where others are just guessing.

Precision at the highest level.

Scissor Lift VLS 5450A | Above ground / Inground

Large 5 t scissor lift - for wheel alignment | Electrohydraulic | without drive-in ramps | Q.Lign-ready

Article number: 1 692 851 312

  • Can be installed either inground or above ground
  • Lifting height elevated 2100 mm, under floor 1770 mm
  • Double cylinder in each scissor mechanism
  • Safety latching device
  • User manual, log book and CE declaration included in scope of delivery

Perfect for wheel alignment

  • Saves unnecessary trips around the vehicle: integrated pneumatic slip plates
  • For light vehicles to transporters
  • Capacity 5000 kg
  • Platform length 5200 mm
  • Wheel alignment made according OEM requirements
  • Other services can be made on the same working station
  • Extra-wide platforms
  • Factory-prepared for Q.Lign

Strong and sturdy construction

  • Full rust protection with cataphoresis treatment of platforms and frames
  • Double hydraulic circuit with 4 hydraulic cylinders for perfect leveling and a better reliability

User friendly command unit

  • With press-buttons
  • The power unit cabinet can be placed either at the left side or at the right side of the lift
  • Quick raising: Motor power 4 kW for 30 second lifting time

All lifts Type VLS 5450 are delivered as standard with guide rails for Jacking beams VLH 320 or VLH 330

Note: Depending on the desired configuration (above ground/inground), the correct type of access ramps must be ordered! Wheel chocks are included in the scope of delivery of the access ramps. The ramps for above ground installations additionally include the cable canal.

Operating pressure310 bar
Compressed air connection6 - 8 bar
Fuse protection16 A
Rated load capacity5000 kg
Lifting height2100 / 1770 mm
Concrete strength/quality140 mm - C25/30
Oil quantity20 l
Power supply400 V | 50 Hz
Motor power4 kW
Width of runways700 mm
Length of runways5200 mm
Concrete strengthC25/30
Lifting time30 s
Foundation depth w/o floor covering140 mm
Drive-on height above ground, without accessories330 mm
Phases3
Drive-on ramps & cable canal for VLS 5450 and 5660 | Above ground | 2 pieces1 692 875 029
Drive-on flaps for VLS 5450 and 5660 | Inground | 4 pcs.1 692 875 001
Fastening materials set for VLS 5450 series | 25 pcs.1 692 875 032
Lighting kit LED | for VLS 5450 and 56601 692 875 039
Hose extension set for VLS 5450 series | 2 m1 692 875 038
Jacking beam VLH 320 | for VLS 5450 and 5660 | 2000 kg1 692 875 002
Jacking beam VLH 330 | for VLS 5450 and 5660 | 3000 kg1 692 875 004
Lift adapter two positions1 690 701 231
SmartLink adapter Universal | >5.1m platform length1 690 900 013
Filling piece 180mm | for VLS 54501 692 876 044
  • Brochure
Scissor lift VLS 5450

Scissor lift VLS 5450

Date
2019-12-08
Type
pdf

Product information sheet