We measure where others are just guessing.

Precision at the highest level.

Scissor Lift VLS 5450LP | Above ground / Inground

Large 5 t scissor lift - for vehicle inspection and reception reception bay | Electrohydraulic | with integrated wheel free auxiliary lift, 4 t and play detector | without drive-in ramps | Q.Lign-ready

Article number: 1 692 851 320

  • Saves unnecessary trips around the vehicle: integrated pneumatic slip plates
  • Hydraulic synchronization safety system
  • Lifting time 30 s
  • Lifting height above ground 2100 mm, inground 1770 mm
  • Sturdy design with overall weight of 2320 kg (inground version)
  • Automatic level control
  • Double cylinder in each scissor mechanism
  • Safety latching device
  • Elastomer blocks, user manual, log book and CE declaration included in scope of delivery
  • Factory-prepared for Q.Lign

Strong and sturdy construction

  • Full rust protection with cataphoresis treamtment of platforms and frames
  • Double hydraulic circuit with 4 hydraulic cylinders for perfect leveling and a better reliability

User friendly command unit

  • with press-buttons
  • The power unit cabinet can be placed either at the left side or at the right side of the lift.
  • With integrated wheel free auxiliary lift: - Capacity 4000 k - Lifting height 565 mm - Platform length 1500 - 1940 mm - incl. 4 rubber lifting pads Integrated hydraulic play detectors for the front axle (Left and right) - ideal for vehicle-inspection or direct reception
  • Quick raising: Motor power 4 kW

LP: Integrated play detector for the front axle (left and right) with hydraulic control for direct vehicle inspection

All lifts Type VLS 5450 are delivered as standard with guide rails for Jacking beams VLH 320 or VLH 330

Note: Depending on the desired configuration (above ground/inground), the correct type of access ramps must be ordered! Wheel chocks are included in the scope of delivery of the access ramps. The ramps for above ground installations additionally include the cable canal.

Operating pressure310 bar
Compressed air connection6 - 8 bar
Weight2050 kg
Fuse protection16 A
Rated load capacity5000 kg
Lifting height2100 / 1770 mm
Concrete strength/quality140 mm - C25/30
Oil quantity25 l
Power supply400 V | 50 Hz
Motor power4 kW
Rated load capacity of wheel free lift4000 kg
Lifting height of wheel free lift560 mm
Width of runways700 mm
Length of runways5200 mm
Concrete strengthC25/30
Lifting time40 s
Foundation depth w/o floor covering140 mm
Drive-on height above ground, without accessories330 mm
Phases3
Lifting length of wheel free lift1500 - 1940 mm
Drive-on ramps & cable canal for VLS 5450 and 5660 | Above ground | 2 pieces1 692 875 029
Drive-on flaps for VLS 5450 and 5660 | Inground | 4 pcs.1 692 875 001
Fastening materials set for VLS 5450 series | 25 pcs.1 692 875 032
Lighting kit LED | for VLS 5450 and 56601 692 875 039
Hose extension set for VLS 5450 series | 2 m1 692 875 038
Jacking beam VLH 320 | for VLS 5450 and 5660 | 2000 kg1 692 875 002
Jacking beam VLH 330 | for VLS 5450 and 5660 | 3000 kg1 692 875 004
Elastomer block for auxiliary lift table | 20 mm | 1 pc1 692 875 033
Elastomer block for auxiliary lift table | 40 mm | 1 pc1 692 875 034
Elastomer block for auxiliary lift table | 60 mm | 1 pc1 692 875 037
Elastomer block for auxiliary lift table | 80 mm | 1 pc1 692 875 035
Elastomer block for auxiliary lift table | 100 mm | 1 pc1 692 875 036
Filling piece 180mm | for VLS 54501 692 876 044
  • Brochure
Scissor lift VLS 5450

Scissor lift VLS 5450

Date
2019-12-08
Type
pdf

Product information sheet