We measure where others are just guessing.

Precision at the highest level.

Suspension tester SN 680 | 230 V | EUSAMA | with noise detection

Special accessory for series BD 4xxx brake tester | only to be used for checking the technical condition of suspension elements

Article number: 1 691 620 308

  • Under unfavorable conditions, the road surface adhesion of a wheel is governed by the technical condition of the suspension elements (suspension system, wheel bearings, tires and shock absorbers).
  • The SN 680 measures the relative road surface adhesion of a wheel on the basis of the internationally recognized EUSAMA principle.
  • The results of the full chassis test provide an overall assessment of the road safety of the vehicle.
  • Measurement system: Bending bar with strain gauge

Scope of delivery:

  • Suspension tester SN 680
  • RR Connecting cable
  • RR Set of clamping fixtures and fastening materials
Weight330 kg
Packing2420 x 820 x 700 mm
Fuse protection3 x 20 A
Protection classIP 54
Length440 mm
Height280 mm
Operating temperature-10 - 50 °C
Electrical connection230 V | 50 - 60 Hz
Measuring systemDMS
Max. sound pressure level70 dB(A)
Width2360 mm
Max. axle load testable1650 kg
Test width min. - max.820 - 2200 mm
Test frequency0 - 30 Hz
Motor power2 x 3 kW
Engine speed1420 rpm
Temperature max.90 °C
Storage temperature-10 - 50 °C
Supply lead4 x 2,5 mm²
Fuse rating of power supply14,2 A
Test principle- Excitation method (principle of EUSAMA)
Test plate length690 mm
Test plate width273 mm
Power factor (cos φ)0,7
Gross weight360 kg
Phases3
Relative humidity max.85 %
Max. drive-over load4000 kg
Frequency range noise detection10 - 30 Hz
Edge protection for suspension Tester SA 640 / SN 6801 691 622 002
Drive over ramp to replace suspension tester SA / SN 6xx1 691 621 026
Edge protector for test lane TL / SL 6xx1 691 602 001
Installation frame for test lane with EUSAMA suspension tester1 691 602 002
Spacer for BD 4xxx in combination with SA 640 / SN 680935 603 042
Positioning ramps for suspension tester1 691 621 017
Clamp set for EUSAMA suspension tester1 691 621 000
Installation kit for suspension tester SA 6401 691 621 001
Cable set 400 V | Power-Box to suspension tester | 30 m1 691 603 369
Cable set BNet-Cable | Power-Box to suspension tester | 30 m1 691 602 557

By viewing this video, you accept YouTube's privacy policy.
Read more...

Product information sheet