We measure where others are just guessing.

Precision at the highest level.

Wheel aligner Easy 3D+ | X-OEM Version

Wheel Alignment with 3D technology - High speed, high precision and easy to use | Cable version | with cabinet, HighPerformance PC, 27" monitor and printer | incl. lift adapter, cable set, turntable Standard, wheel clamps and OEM magnetic clamp

Article number: 1 690 700 077

NEW: Now with SmartTest - Quick alignment check with printout in under 90 seconds

  • Highly automated routine
  • Automatic target recognition
  • Automated printout of protocol and reset for next vehicle check

Perfectly integrated in ADAS calibration and head light testing:

  • The space in front of the lift can be used for the ADAS calibration jig and head light tester
  • Permanent self-check and precise ADAS calibration jig orientation to the thrust vehicle's thrust angle
  • No need for extra cameras, cables, clamps or targets required for ADAS calibration

Best in class: +/- 2 minute accuracy

  • Engineered and produced in Germany
  • No fixed position for targets on the vehicle eliminates room for error
  • Plug & play: no calibration required for installation or for exchanging targets
  • Space-saving and easy storage of sensor heads on wall mount kit
  • Beissbarth DualView camera system for ultimate control, especially of complex chassis
  • OEM magnetic clamps for safe mounting on the wheel

Highly repeatable initial measurement

  • Rolling or driving run-out compensation at ground level
  • Three selectable measurement routines: program-driven, quick measurement, choice-free access to single-value check

Sophisticated software for maximum measurement and adjustment efficiency

  • Real-time display of measured values combined with vehicle specs
  • Visually animated adjustment instructions for third-party vehicles
  • Several languages as standard for staff from all over the world
  • ASA network ready

 

  • Cable version

Scope of delivery:

  • Sensor head with DualView camera technology
  • +Software with SmartTest and ADAS calibration option
  • Target boards
  • Vehicle specs database
  • Cabinet
  • HighPerformance PC
  • 27" Monitor
  • Printer
  • Multi-Fit wheel camp 13" - 22" with standard and Softline claws
  • OEM magnetic clamp
  • Lift adapter
  • Cable set, 15 m
  • Turntable Standard, without electronics
  • Remote control
  • Brake pedal depressor and steering wheel holder
Weight197 kg
Operating temperature5 - 40 °C
Electrical connection120 - 220 V | 50 - 60 Hz
Data transmission type- corded
Measuring system- 3D
Power0,5 kW
Storage temperature-20 - 60 °C
Packaging length1150 mm
Packaging width1200 mm
Packaging height1600 mm
Gross weight219 kg
Relative humidity, use(40 °C) 10 - 90 %
Height cabinet1520 mm
Width cabinet880 mm
Depth cabinet770 mm
Weight cabinet100 kg
Height sensor head130 mm
Width sensor head320 mm
Depth sensor head630 mm
Weight sensor head9,3 kg
Height WLAN box627 mm
Width WLAN box250 mm
Depth WLAN box131 mm
Weight WLAN box7,4 kg
Degree of protection WLAN boxIP 54
Vehicle database update Cars & Vans Europe | Key Card1 690 002 015
Mechanical aluminum turntable Standard1 690 501 001
Mechanical aluminum turntable Precision1 690 401 028
Filling piece for aluminum turntable1 690 702 082
Protective rubber cover for aluminum turntable1 690 402 001
Sliding plate for rear axle | short1 690 401 003
Sliding plate for rear axle | long1 690 401 004
Drive-on ramps for two aluminum turntables1 690 701 052
Drive-on ramps for turntables and sliding plates1 690 401 008
Lift adapter extension from one to two positions1 690 701 503
Special lift adapter for Beissbarth / Consul1 690 701 123
Special lift adapter Extension for Beissbarth / Consul1 690 701 311
Special lift adapter for lifts with U-profile1 690 701 020
Floor adapter for LTB 100/3001 690 701 506
Floor adapter for alignment pits1 690 701 027
Magnetic clamps for wheel bolts | 75mm1 690 701 508
Magnetic clamps for wheel bolts | 100mm1 690 701 521
Multi-Fit wheel clamp with standard claws | 13 - 22" | 4 pcs.1 690 311 112
Multi-Fit wheel clamp with standard claws | 13 - 22" | 1pc.1 690 311 089
Extension set for Multi-fit clamps | 23 - 28"1 690 311 113
Set softline claws for 1 x Multi-fit clamp | Softline rims1 690 311 164
Set truck claws for 1 x Multi-fit clamp | Truck1 690 311 115
Central clamp Porsche Carrera GT1 690 301 002
Central clamp Porsche 911 GT3 and Turbo1 690 380 002
Self-centering quick clamp for Porsche1 690 380 010
Self-centering quick clamp for Tesla1 690 380 161
Self-centering quick clamp for Ferrari1 690 381 299
Target boards 340 cm1 690 701 032
Extension for vehicles with narrow track width (Smart)1 690 701 127
Standard target board for Easy 3D1 690 711 005
Special target boards for DAS calibration jig in combination with 4-post lifts1 690 701 152
Standard target boards for DAS calibration jig1 690 701 119
Cable set 7.5 m / 7.5 m1 690 701 205
Cable set 12 m / 12 m1 690 701 029
Cable set 15 m / 15 m1 690 701 030
Cable set 25 m / 25 m1 690 701 163
Brake pedal depressor 1 690 401 006
Steering wheel holder 1 690 401 007
Step protection for Easy 3D1 690 701 045
Toe press bar for Mercedes Benz1 693 600 001
Ballast bag 5 kg1 693 740 001
Ballast bag 8 kg1 693 740 693
Ballast bag 10 kg1 693 740 002
Ballast bag 20 kg1 693 740 003

By viewing this video, you accept YouTube's privacy policy.
Read more...

  • Brochure
Wheel alignment

Wheel alignment

Date
2019-12-05
Type
pdf

Product information sheet